Glass Reinforced Plastic — fibreglass, or fiberglass in American spelling — is the material we build most of our work in — a glass-fibre reinforcement in a cured polymer matrix, moulded to shape rather than fabricated. Everything here is manufactured at our Ajman factory and supplied across the UAE. It does not corrode, needs no painting because the colour is pigmented into the gel coat in the mould, and can be made to almost any form a mould can be built for.
What we manufacture in GRP
- Water tanks, chemical tanks and cylindrical tanks
- Manhole chambers, shafts and benching
- Fish hatchery and aquaculture tanks
- Swimming pools
- Portable toilets, toilet cubicles and urinals
- Domes
- Planters
- Bollards
- Litter bins and street furniture
- Doors
- Translucent sheets
- Stadium and auditorium chairs
- Pergolas and canopies
- Decorative screens
- Ceilings
- Moulds and tooling, built to your drawing
Pipe, manhole and lamination work
Large-diameter GRP pipes, manhole chambers and shafts, laminated by hand in our Ajman factory. Pipe inlets and channels are laminated into the chamber base so the flow path is continuous GRP with no jointed transitions to corrode.
Portable toilets
Single and multi-cabin GRP toilet units, moulded as one-piece shells with the colour pigmented into the gel coat. Built for site and event use in Gulf conditions, and produced from our own moulds so repeat orders carry no tooling cost.
Tanks
Planters, bins and street furniture
Moulded in GRP with the colour pigmented into the gel coat, so they hold their finish outdoors without painting. Any RAL colour, and any size we can build a mould for.
Lining works
Applied on site by our own crews, scheduled around your shutdown window.
- Tank and bund lining
- Steam, shower and wet room lining
- Gutter and valley gutter lining
- Vehicle lining
- Planter lining and liners
- Pond and water feature lining
- Flat roof lining
Specifying the right laminate
Resin selection, not the moulding, decides what a vessel can hold. General-purpose polyester suits water and mild solutions; isophthalic and vinylester resins handle acids, alkalis and oxidising agents; phenolic systems are specified where fire performance governs. Send us the medium, its concentration and its operating temperature and we will specify the resin and laminate schedule against it.